Switch Amplifier KCD2-ST-1.LB

Switch Amplifier KCD2-ST-1.LBSwitch Amplifier KCD2 ST 1. LB 1 channel signal conditioner 24 V DC supply (Power Rail) Dry contact or NAMUR input 2 active transistor outputs Usable as signal splitter (1 input and 2 outputs) Reversible mode of operation Line fault detection (LFD) Housing width 12. 5 mm SIL 2 (SC 3) acc. to IEC EN 61508 This signal conditioner provides the galvanic isolation between field circuits and control circuits. The device transfers digital signals (NAMUR

6- Rated values acc

It is possible to configure

The device transfers DC signals of fire alarms and smoke alarms from the hazardous area to the non-hazardous area

For the detailed parameters refer to the Zener Barrier certificate

II Contact loading 50 V AC/2 A/cos φ > 0

for Class I

20 mA Available voltage ≥ 16 V at 20 mA

Compatible with Windows® (32- and 64-bit Windows® 7

Loop powered

The modem is operated by replaceable AAA batteries and can operate for approximately 20 hours

The location of the Modbus registers and data type of the Modbus variables can be configured from any FF configurator

Purge System