SIEMENS RNI

SIEMENS RNIThe Remote Network Interface (Model RNI) from Siemens Fire Safety provides a connection point for field wiring in a Siemens Modular (or FireFinder) fire alarm control panels remote lobby enclosure. Model RNI provides screw terminals and connectors for power and communication circuits for equipment mounted remotely from the main FACP. Model RNI is mounted in the Model REMBOX2 or Model REMBOX4 remote lobby enclosure.

— ANN-80 Remote Fire Annunciator

TrueAlert Addressable MultiTone Horn

The thermal detector continually monitors the detected temperature and reports it to the fire alarm control panel

The versions with heat sensor detect fires with rapid temperature increase or with a maximum temperature value

1 Heat / 1 Cool Conventional or 2 Heat / 1 Cool Heat Pump

All field wiring connects to terminal blocks on the motherboard

Both panels include a dynamic push-to-talk microphone and operator interface panel

Available in both a low voltage (CM-6) and line voltage (CM-12) option

Knockouts are positioned at numerous points to easily aid the installer in bringing a conduit into the enclosure

If you are outside the United States and need our items you can contact us through an Ebay message

For semi flush mounting use a standard North-American four inch square box with a single gang plaster cover having an overall minimum depth of 2-1/4 inch (57mm)

The SIGA-CR is an addressable device used to provide one Form "C" dry relay contact to control external appliances (door closers